Third Marking period (21-28)

Using  Sketch up, i was able to explore using the shape and pencil tool to create these three shapes. Using the pencil tool i was able to create the triangle. Then, with the square tool and circle tool i made the others.

I was also able to make 3D shapes using the "Push/Pull" tool. I created the same shapes, using the same tools as i did in the first image. Then, i just "Pulled" the image out to easily make it 3D. 

Finally, I was able to write out my name in 3D bubble letters. i used the pencil tool to write out my name. Then, i used the "Push/Pull" tool to make each letter 3D.

Block one Full dimension:  8'x5'x5' 

Block two dimension: 8'x5'x5'

Block three dimension: 9'x4'x6'

Block Four dimension: 7'x6'x4'

Block Five dimension: 8'x5'x5'

Block six dimension: 8'x5'x6'

Block Seven dimension: 8'x5'x6'

Block Eight dimesnion: 8'x5'x6'

Block Nine dimension: 9'x4'x6'

Block Ten dimension: 11'x3'x6'

Block Eleven dimension: 8'x5'x6'

Block Twelve dimension: 9'x4'x6'
Task 22
To do this assignment, overall you first had to make a rectangle with the right dimensions of length, width and then height (LxWxH). . To get the dimension correctly measured, I used the measuring tape tool to measure each side and "Pull/Push" each side. Then, i looked at the diagram to find the correct lengths for the cuts. Using the measuring tape tool, i measured where the cut would be located and used the "Push/Pull" tool to cute the rectangle.

Quiz: Block #1 

I picked Block #1 as my quiz. The basic dimensions were 9x6x5 ( Length x width x height) . To make my blog, i measured 5' on the bottom of the block on the x-axis. Then, i measured 3' on the top , on the x-axis. I connected both points and pushed it in 2'. I did this for both sides of the block to give it a T- formation. Then, i measured 4' on the top of my block, starting from the top portion of my new point. i connected this point to the bottom of my block and pushed the piece off to give it a slant front look. Then i used the bucket to add color and added the dimensions. 

task#23 Bungalow: 

To Create this Bungalow, first I created a box with lengths 14.5'x9.75'x10.75' (x-axis by y-axis by z-axis). I used the "Push/Pull" button to make the rectangle 3D. Then using the compass tool, i created a line on the top right side of my scare (x-axis) that was 60 degrees. on top of it, i made 1.75' straight line and connected it to the box to create the roof of my BUNGALOW. Then, i created 4' frames for my sliding doors and windows. The sliding door had a 2' indent and the window had a 1' indent. (Front view). Then, for the side view i created a rectangle with a 1' indent on each side. I divided it into four and did the same steps as i did for the first window. Using rectangles, i created my fence and my deck. Then using the bucket, i was able to color it.  

Task#24 

To give my Bungalow a 3D effect, first i opened my background image on Photoshop. Then, i opened the image of my Bungalow onto the image. I made a copy of the layer and turned off the "Blue and green" channels.Then, i positioned this image slightly to the left from the original. For the original, i unchecked the Red channel. 

Task#25

I created a elipse, and added different effects to it. Then, i made a copy of the image and cleared the layer effects. I created the Aluminum effect by adding a noise effect to the middle of my button. Using Radial blur, i was able to give it a circular effect. I added the power symbol afterwords. I added style effects to the image. Making a copy of the power button, i gave the image an Orange effect.Afterwards, i added animation to the button to give it it's glowing effect. I saved the image as a GIF. 

GIF stands for  "Graphics Interchange Format - Picture Format" Saving an image as a gif, saves all data of an image. It is also used, because it saves images with animation .

Task#26 (Part 1)

To complete this assignment, i used basic tools like the Rectangle tool,the Rectangle Marquee tool, the bucket (fill), turned on the snap option, and the rulers.

Task#26 Part 2 : I finished by adding lights ( using Glow effects). Finally, i added the pictures to showcase Omar :). 

Task #27: Going back to Publisher, i created a brochure with information on my 2013-2014 high school schedule.